SL RELIANCE LTD
Enjoy the better Life via Fiber Optic
Add to Cart
Optical Outdoor 96 Core Fiber Optic Network Cable GYTS Single Mode Fiber Optic Cable
The instruction of GYTS armored fiber optic cable is the single mode or multimode inserted to loosely tube by high the plastic of moudle. Filling gel, the blocking material in the tube. One single metal strength member is in the middle of cable, added a layer of polyethylene sheath on it for some cores of fiber cable(if necessary). loose tube and filling compound tightly tied up with center metal strength member roll to be cylindrical cable . Packed with PE sheath after armored Al-plastic tape .Packed with PE sheath after double armored polyethylene steel .
This fiber optic cable is in good main pferfamcance suchas low loss and sipersion. The longitudinal wrap of Steel tape enhances cable’s moisture proof performance and ensures cable’s flexibility and anti-bending capability.In this fiber optic cable, water-blocking cable gel is fully filled outside the strength member and inside the cable core, which ensures the cable’s moisture proof and water barrier performance.
Features:
·Fiber count :2~288 , low loss, low dispersion.
·Proper design and precise excess length control offer excellent mechanical and environmental properties to cable.
·Corrugated steel tape armor ensures nice moisture proof and side pressure resisting.
·Small size, light weight, easy to install.
·Applicable to long distance, inter-exchange communication, CATV, computer network transmission system, etc.
·Jacket can be made of LSZH material,(The model turns to GYTZS in the case)
| Cable Parametres: | ||
| Number of fiber | 2~288 cores | |
| Fiber type | Single mode G652d or other | |
| Moisture Barrier | Water blocking system | |
| Central strength member | Material | Steel wire/FRP |
| size | 1.5mm~2.0mm | |
| Loose tube | material | PBT |
| diameter | 2.0mm | |
| Tube-filling | Tube filling compound | |
| Armoring | Material | Corrugated steel tape/Aluminum |
| Outer sheath | material | PE |
| color | Black | |
| Cable Sheath Marking | ||||||||||
| XXXOFC 2021 GYTS XXCORE SM XXXXM | ||||||||||
| XXXOFC | manufacture's brand, (as client order) | |||||||||
| 2021 | manufacture year | |||||||||
| GYTS | cable type | |||||||||
| XXXXM | marks for meters | |||||||||
| Item | Parameter | |
| Fiber-G652D | Attenuation Coefficient | 1310nm dB/km ≤0.4 |
| 1550nm dB/km ≤0.3 | ||
| Outer jacket | Material | MDPE |
| Color | Black | |
| Min. bending radius | Static | 10 times cable diameter |
| Dynamic | 20 times cable diameter | |
| Repeating bending | Load:150N;number of cycles:30 No obvious addition attention, no fiber break and no cable damage. | |
| Tensile performance | Short term | 1500N The addition attention≤0.1dB,fiber strain ≤0.15% |
| Crush | Short term | 1000N/100mm The addition attention≤0.1dB |
| Torsion | Load:150N; number of cycles:10; twist angle:±180° No obvious addition attention, no fiber break and no cable damage. | |
| Impact | Impact energy:450g×1m; radius of hammer head:12.5mm; number of impact: 5 No obvious addition attention, no fiber break and no cable damage. | |
| Parameters of single mode fiber : | |||
| Items | Description | ||
| G.652.D | G.655 | ||
| Attenuation (dB/km) | 1310nm | ≤0.36 | ≤0.40 |
| (After cable) | 1550nm | ≤0.22 | ≤0.25 |
| Cable cut-off wavelength (mm) | ≤1260 | ≤1450 | |
| Zero-dispersion wavelength (mm) | 1300～1324 | ≤1520 | |
| Zero-dispersion slope([ps/(nm2·km)]) | ≤0.092 | --- | |
| Dispersion slope(1550nm) ([ps/(nm2·km)]) | --- | ≤0.0084 | |
| 1310nm Mode field diameter (μm) | 8.7~9.5 | --- | |
| 1550nm Mode field diameter (μm) | 9.8~10.8 | 9.1~10.1 | |
| Core/Clad concentricity error (μm) | ≤0.6 | ≤0.6 | |
| Cladding diameter ( μm) | 125±0.7 | 125±0.7 | |
| Cladding non-circularity (%) | ≤1.0 | ≤1.0 | |
| Primary Coating diameter ( μm) | 235～250 | 235～250 | |
| (Before be colored) | |||
| Proof test level (kpsi) | ≥100 | ≥100 | |
| Atttenuation with bending loss(dB) | @1550nm,25 mm radius, 100 turns | ≤0.05 | ≤0.05 |
| @1550nm,16 mm radius, 1 turn | ≤0.05 | ≤0.05 | |
| Attenuation and bandwidth of multi mode Optical fiber: | |||||||
| Fiber type | 850/1300nm Attenuation(20℃) (After cable) | Overfilled Modal Bandwidth | Effective Modal Bandwidth | Application support distance on (at 850nm) | |||
| Typical value | Max value | 850/1300nm | 850nm | 40GBASE-SR4 / 100GBASE-SR101 | 10GBASE-SR | 1000BASE-SR | |
| unit | dB/Km | dB/Km | MHz．Km | MHz．Km | m | m | m |
| 50/125 | 3.0/1.0 | 3.3/1.2 | ≥500/500 | --- | --- | --- | --- |
| 62.5/125 | 3.0/1.0 | 3.3/1.2 | ≥200/500 | --- | --- | --- | --- |
| OM2+ | 3.0/1.0 | 3.3/1.2 | ≥700/500 | ≥950 | --- | 140 | 170 |
| OM3 | 3.0/1.0 | 3.3/1.2 | ≥1500/500 | ≥2000 | 150 | 300 | 550 |
| OM4 | 3.0/1.0 | 3.3/1.2 | ≥3500/500 | ≥4700 | 750 | 1000 | 1100 |